(Worlds I can ignite)Four boardsOne button each
Lightsaber Guide
Mostly for me. Every saber I own runs on one button, and every board counts the holds differently. Proffie, SNV4 and SD RGB are Theory Sabers; the Xenopixel is Imperial Workshop. The Theory boards are from Theory’s own support page.
ProffieTheory Sabers
| Ignite | Short click |
|---|---|
| Ignite muted | Double click and hold |
| Music on / off | Double click |
| Next font | Hold, then release |
| Previous font | Hold and wait |
| Volume menu | Hold and clash; click for louder, hold and release for quieter; hold and clash again to leave |
| Battery check | Triple click |
| Blaster block | Short click |
|---|---|
| Multi-blast | Swing and hold 1 second, release; short click to stop |
| Lockup | Hold and clash |
| Drag | Hold and clash with the tip pointing down |
| Melt | Hold, thrust forward and clash |
| Stab | Thrust forward and clash |
| Lightning block | Double click and hold |
| Force | Point up, hold and twist |
| Color change | Point down, hold and twist; turn the hilt to the color; hold until the confirm sound |
| Battle mode | Triple click and hold |
| Retract | Hold until the blade is off |
SNV4 (SN Pro)Theory Sabers
| Wake | Hold until it says “Power On” |
|---|---|
| Ignite | Tap, or twist |
| Volume | Hold 1 second, release (3 levels) |
| Blade style | Hold 2 seconds, release |
| Ignition effect | Hold 3 seconds, release |
| Sound font | Hold 4 seconds, release; or point up, hold and twist |
| Background music | Point down, hold and twist |
| Blade length | Click 3 times |
| Sleep | Hold until it says “Power Off” |
| Blaster | Tap |
|---|---|
| Lockup | Hold 1 second, release |
| Blade color | Hold 2 seconds, release; or point down, hold and twist |
| Flash on clash | Hold 3 seconds, release to toggle |
| Force | Point up, hold and twist |
| Drag | Hold and hit |
| Melt | Hold and thrust forward |
| Retract | Hold 4 seconds, release; or twist |
SD RGBTheory Sabers
| Wake | Hold until the button light turns on |
|---|---|
| Ignite | Tap, or twist |
| Volume | Hold 1 second, release |
| Sound font | Hold 2 seconds, release; or point up, hold and twist |
| Blade effect | Hold 3 seconds, release |
| Background music | Point down, hold and twist |
| Sleep | Hold until it says “Power Off” |
| Blaster | Tap |
|---|---|
| Lockup | Hold 1 second, release |
| Blade color | Hold 2 seconds, release, then tap to cycle; or point down, hold and twist |
| Blade effect | Point up, hold and twist |
| Flash on clash | Hold 3 seconds, release to toggle |
| Retract | Hold 5 seconds, release; or twist |
Xenopixel V3Imperial Workshop
| Ignite | Press |
|---|---|
| Volume | Hold for 1 flash, release (high, low, mute) |
| Blade effect | Hold for 2 flashes, release |
| Blade mode | Hold for 3 flashes, release |
| Sound font | Hold for 4 flashes, release |
| Sleep | Hold 10 seconds |
| Blaster | Press |
|---|---|
| Lockup | Hold and clash |
| Drag | Hold for 1 flash, release |
| Color | Hold for 2 flashes, release; press to lock it in |
| Fast color | Point down, twist one way and back, release on the color |
| Force | Thrust forward |
| Retract | Keep holding past 2 flashes |
Imperial Workshop publishes no manual of its own; these are the standard Xeno V3 controls, so the card in the box wins if it disagrees.